SHOWTEC DimMaster User's Guide

Showdesigner 1024 ORDERCODE 50720

8 Controller Backside Fig. 2 1) DMX OUT 1+2: These DMX-outputs can control the first 512 DMX channels. 2) DMX O

9 Installation Remove all packing materials from the Showdesigner 1024. Check that all foam and plastic padding is removed. Screw the equipment into

10 2.2 Create a scene Step Description 1 Select the desired fixtures. 2 Move the faders to adjust the lighting effects.

11 2.4 Create a chase There are three ways to create a chase: A. Create the chase by adjusting the faders. B. Create scenes first and then select

12 C: Create the scenes first and then add the scenes into a chase. Step Description 1 Create scenes (see "Create a scene"). 2 Press progr

13 Following parameters can be edited while a chase is running: Press =>/SETY Chase runs forward Press <=/SETX Chase runs backward Press Auto

14 2.8 Master control assignment There are up to 16 master controls available in the Showdesigner 1024. Each of them can be assigned to any channel.

15 2.12 Setup of slope channels The channels that have been assigned to the jog wheels will automatically have a slope assigned when the chase is run

16 Maintenance The Showtec Showdesigner 1024 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power sup

17 Product Specification Model: Showtec Showdesigner 1024 Power input : AC 100V-240V, 50/60Hz, 40W DMX-Output: 3-pin female XLR Audio Input: 100 mV~

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Showdesigner 1024 brings excitement to any venue. Whether you w

1 2 2 3 4 4 4 5 5 5 5 7 7 8 9 9 9 9 9 9 9 9 10 10 11 12 13 13 14 14 14 14 15 15 16 16 17 Showtec Showtec Showdesigner 1024™ Product Guid

2 WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved

3 Repairs, servicing and electric connection must be carried out only by Showtec. For replacement use fuses of same type and rating only. This

4 Description of the device Features The Showdesigner is a light controller from Showtec and features: • 1024 DMX control channels, compatible with

5 Controller Front 1) Fixture selection buttons There are 32 buttons with 32 fixed DMX channels, all for direct fixture selection. If a fix

6 Exit: Use this button to exit the program or delete mode. Blackout: Use this button to kill all output. Pause: Press this button to pause all run

7 E/XY: Use this button to switch between either speed/slope or pan/tilt function for the