SHOWTEC Scanmaster 1 User's Guide

Scanmaster 3 ORDERCODE 50337

8Display InformationThe LCD Display contains a maximum of 2 lines, each containing 8 characters. Below are the definitions.LCD Display MessageSN1 Scen

9SCENESProgramming a Scene1) Enter program mode (See Enabling Program Mode)..2) Check the blackout key and verify that the LED is not lit, if it is, p

10Copy a Scene1) Enable Program Mode.2) Tap the BANK Up/Down button, to select the bank containing the scene you wish to copy.3) Select the scene you

11CHASESProgramming a ChaseNote: You must have already programmed scenes in order to program a chase. This function allows you tocycle through up to 2

12JOYSTICK / CHANNEL SELECTIONSet-up Joystick1) Press and hold the PROGRAM button, until the LED is lit.2) Press and hold the MODE and FINE button at

13FADE TIMEFade Time / Assign Fade Time1) With the power off, press the MODE and Tap/Display buttons at the same time.2) Turn the power back on, tap t

14Running ChasesManual Mode1) When the power is turned on, the unit automatically enters manual mode.2) Select the chase you wish to run by pressing t

15MIDI Implementation ChartMIDI IMPLEMENTATION CHART Scanmaster 3FunctionTransmitted Recognized RemarksBasic channel Default X 1Changed X 1-16Mode Def

16MaintenanceThe Showtec Scanmaster 3 requires almost no maintenance. However, you should keep the unit clean.Disconnect the mains power supply, and t

17Product SpecificationModel: Showtec Scanmaster 3Voltage : AC 230V-50Hz (CE)Power input: DC9 ~ 12V, 500 mA min.Audio trigger: Built-in MicDMX Input :

Congratulations!You have bought a great, innovative product from Showtec.The Showtec Scanmaster 3 brings excitement to any venue. Whether you want si

2006 Showtec.

12235557778889999910101010111111111111111212121212121313131313131314141414ShowtecShowtec Scanmaster 3™ Product GuideWarning..…...

21414141415161617FILE TRANSFER……………………………….……………………………………………………………..- To Send a File Dump.……………………..……….…….…………….…………..……….…………- Receive a File Dump..

3WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the inst

4• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do notswitch it on immediately. The arising condens

5Description of the deviceFeaturesThe Scanmaster 3 is a lightcontroller from Showtec.• 192 DMX channels• 12 Scanners of 16 channels each• 30 Banks of

61) SCANNER buttons To select scanners for setting, programming or recording.2) FOG MACHINE button This button is used to control the Fog machin

7BacksideFig. 221) AUDIO LINE INPUT 0.1V~1Vp-p22) MIDI IN Used to receive MIDI data.23) DMX polarity select Used to select DMX polarity