SHOWTEC Scanmaster 2 MKII User's Guide download pdf (Page 10)

Editing a scene

1) Enter program mode.

2) Press the BANK Up/Down button (11) to select the bank containing the scene you wish to edit.

3) Select the scene you wish to edit by tapping its SCENE button (2).

4) Use the faders and/or joystick to make the desired adjustments to the scene.

5) Once you have completed the changes, tap the MIDI/Rec button (17).

6) Tap the SCENE button (2) that corresponds to the scene you're editing. This will override the existing

scene. All LEDs will flash briefly, meaning your setting has been saved.

Be sure to select the same scene in steps 3 and 6, otherwise you may accidentally record over an existing

scene.

Copy Scanner Settings

This setting allows you to copy the settings from one scanner to another.

1) Enter program mode.

2) Press your selected FIXTURE button (1). Its LED will lit.

3) Set your desired channel output.

4) Press and hold down the FIXTURE button (1) you wish to copy. Then tap the Fixture button where you

want to copy your settings into.

5) While holding down the button, tap the button of the scanner you wish to copy the settings to.

Copy a scene

1) Enter program mode.

2) Tap the BANK Up/Down button (11), to select the bank containing the scene you wish to copy.

3) Select the scene you wish to copy, by pressing its SCENE button (2).

4) Using the BANK Up/Down button (11), select the bank you wish to copy the scene to.

5) Tap the MIDI/Rec button (17).

6) Tap the SCENE button (2) you wish to copy the scene to.

All LEDs will flash briefly, meaning your copy has been saved.

Delete a scene

1) Enter program mode.

2) Press the desired SCENE button (2), to select the scene you wish to delete.

3) Press and hold down the Auto/Del button. While holding the button, tap the SCENE button (2) that

corresponds with the scene you wish to delete. All LEDs will flash briefly, meaning your scene has been

deleted.

4) When the programmed scene is deleted, all DMX channel values will be set to 0.

Delete All Scenes

1) Turn the unit’s power off, then press and hold down the PROGRAM and BANK Down buttons at the same

time.

All LEDs will flash briefly, meaning your scenes have been deleted.

2) Turn the unit back on, and all scenes should be cleared.

Copy a Bank of Scenes

1) Enter program mode.

2) Tap the BANK Up/Down button (11) until you reach the bank you wish to copy.

3) Tap the MIDI/Rec button (17).

4) Tap the BANK Up/Down button (11) to select the bank you wish to copy to.

5) Tap the Music/Bank Copy button (16), all LEDs will briefly flash three times, indicating the function has

been completed.

6) Press the PROGRAM button (15) for three seconds to exit programming mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Comments to this Manuals

No comments

SHOWTEC Scanmaster 2 MKII User's Guide Page 10

Comments to this Manuals

Related products and manuals for DJ controllers SHOWTEC Scanmaster 2 MKII