10
CHASES
Programming a Chase
Note: You must have already programmed scenes in order to program a chase. This function allows you to
cycle through 12 programmable chases, with up to 240 scenes each, in a preselected order. It is
recommended to delete all chases in the controller, before programming chases for the first time. Also see
Delete All Chases for instructions.
1) Enter program mode.
2) Tap the CHASE button (14) to select the chase you wish to program. Its LED will lit.
3) Select a desired scene from the bank that has scenes stored inside it.
4) Tap the MIDI/Rec button (17). All LEDs will flash briefly, meaning your copy has been saved.
5) Repeat steps 3-4, until all desired scenes have been entered.
Inserting a Bank of Scenes into a Chase
1) Enter program mode.
2) Select the chase you wish to program.
3) Use the BANK Up/Down button (11) to select the bank of scenes you wish to copy.
4) Tap the MUSIC/Bkc button (16).
5) Tap the MIDI/Rec button (17), all LEDs will flash, indicating that the requested operation has
been performed.
Adding a Step
1) Enter program mode.
2) Press the corresponding button, to add a step to the chase you wish.
3) Press the TAP/Display button (19), the LCD will show the current step.
4) Press the BANK Up/Down button (11) and scroll to the step you wish to insert the step after.
5) Press the MIDI/Rec button (17), the segment display will read the step one step higher than before.
6) Tap the TAP/Display button (19) again. The LCD shows the current chase, scene, and bank. Create a
desired scene and record it as a new step or select a previously programmed scene to add to the chase.
7) Once you have selected the scene you wish to add, press the MIDI/Rec button (17) again. All LEDs will
flash indicating the new step has been inserted into the chase.
8) Repeat steps 3-7, until all desired steps (scenes) have been added.
Delete a Step
1) Enter program mode.
2) Select the chase, which contains the step you wish to delete.
3) Press the TAP/Display button (19), the LCD shows the current step.
4)
Press the BANK Up/Down button (11) and scroll to the step you wish to delete.
5) Press the Auto/Del button (18) to delete the step. All LEDs will flash, indicating the step has been deleted.
Delete a Chase
1) Enter program mode.
2) Press the corresponding CHASE button (14), to delete the chase you wish.
3) Press and hold down the AUTO/Del button (18) while holding down the CHASE button (14). All LEDs will
flash, indicating the chase has been deleted.
Delete All Chases
1) Turn the unit’s power off, press and hold down the AUTO/Del (18) and BANK Down buttons (11) at the
same time. All LEDs will flash briefly, meaning your chases have been deleted.
2) Re-apply the power, and all chases should be cleared.
(13 pages)
(19 pages)
(35 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals