SHOWTEC Scanmaster 2 MKII User's Guide download pdf (Page 16)

FILE TRANSFER

File Transfer allows the user to transfer all information stored in one Scanmaster 2 MKII to a second

Scanmaster unit. You must connect the units using 3-pin XLR cables. The unit sending the information will

have the cable plugged into the DMX Out plug, and the receiving the information will have the cable running

into the DMX In location.

Before data sending, make sure the connections between this unit and the connected DMX receiver are OK.

Note: You can use a compact memory stick (USB Stick) for convenient data backup and transfer.

To Send A File Dump

1) With the power off, press and hold down the FIXTURE 2 and 3 buttons and SCENE 1 button at the

same time.

2) Turn the unit back on, while pressing these three buttons, the LCD will read "READ" indicating that

the unit is ready to send the files.

3) Press SCENE button 7 and 8 at the same time to send the file dump. The LCD will read "OUT" until the

data sending is finished.You can also tap the Scene1 button during data sending to return and resend the

data.

4) If an error occurs during the file dump, the LCD will show "FAIL".

Receive File Dump

1) With the power off, press and hold down the FIXTURE 2 and 3 buttons and SCENE 1 button at the

same time.

2) Turn the unit back on, while pressing these three buttons, the LCD will read "READ" indicating that

the unit is ready to send the files.

3) When receiving is finished, the unit will automatically return to normal mode.

You can also tap the Scene1 button during data sending to return and resend the data.

4) If an error occurs during the file dump, the LCD will show "FAIL".

DMX CHANNELS

Scanners DMX Channels

1 1-16

2 17-32

3 33-48

4 49-64

5 65-80

6 81-96

7 97-112

8 113-128

9 129-144

10 145-160

11 161-176

12 177-192

1 2 ... 11 12 13 14 15 16 17 18 19

No comments

SHOWTEC Scanmaster 2 MKII User's Guide Page 16