SHOWTEC Explorer 1200 User's Guide

Explorer 1200 ORDERCODE 40195

8

9InstallationInstalling the LampThe Showtec Explorer 1200 uses the MSR 1200SA (ordercode 80950) bulb as manufactured by all popularmanufacturers. Use

10Lamp AdjustmentYou can adjust the lamp’s position by turning the screws X, Y, Z.The lamp position is set in the factory. As the lamps, which can be

11Set Up and OperationFollow the directions below, as they pertain to your preferred operation mode.Before plugging the unit in, always make sure that

12Multiple Explorers Set UpDMX-Set upFig. 4Note : Link all cables before connecting electric power

13

14DMX ProtocolChannel 1 - Horizontal movement (Pan)Push the slider up, in order to move head horizontally (PAN).Gradual head adjustment from one end o

15Channel 10 – YellowChannel 11 – Color Correction 6000ºK - 3200ºK0 6000ºK255 3200ºKChannel 12 – CMY + CTF Change SpeedChannel 13 – Rotating Gobo whee

16Channel 16 – Rotating gobo index, rotating gobo rotation Gobo wheel BChannel 17 – Prism wheel0-51 Open52-104 Diamond105-157 3-facet prism158-210 Str

17Channel 24 – Dimmer intensityThe Explorer 1200 can be operated with a controller in control mode or without the controller in stand-alone mode.Contr

Congratulations!You have bought a great, innovative product from Showtec.The Showtec Explorer 1200 brings excitement to any venue. Whether you want si

18- The controller is switched off or defective, the cable or connector is detective, or the signal wires are swapped in the input connector.Note

19Channels settings

20MaintenanceThe operator has to make sure that safety-relating and machine-technical installations are to be inspectedby an expert after every year i

21Replacing a Gobo from the Rotating GobowheelGobo-wheel with rotating gobo’s1. Disconnect mains power supply and set the switch to OFF.2. Make sure t

22Replacing a Gobo from the Effect wheel1. Disconnect mains power supply and set the switch to OFF.2. Make sure that the gobo you want to insert has t

23Problem Probable cause(s) RemedyNo power to the fixture ·Check that power is switched on and cables are plugged in.One or morefixtures arecompletely

24Product SpecificationModel: Showtec Explorer 1200Voltage: 240V-50Hz (CE)Power: 1600WFuse: 10A / 250VDimensions: 525x489x602mm (LxWxH)Weight: 60 kgOp

2006 Showtec.

122345667991011111114141717171920202021212222222224ShowtecShowtec Explorer 1200™ Product GuideWarning..…...

2WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the inst

3• Only operate the fixture after having checked that the housing is firmly closed and all screws aretightly fastened.• Only operate the device afte

4RiggingPlease follow the European and national guidelines concerning rigging, trussing and all other safety issues.Do not attempt the installation yo

5Mounting a clamp to the underside of the Explorer moving headImproper installation can cause serious damage to people and property !Connection with t

6Description of the deviceFeaturesThe Showtec Explorer 1200 is a moving head with high output and great effects.• 1 Color-wheel with 6 colored gobos,

7Backside 6 745 8 9Fig. 24) Fuse 10A 230V5) ON / OFF6) DMX signal connector (OUT) 5-pin7) DMX signal connector (OUT) 3-pin8) DMX signal co