SHOWTEC Indigo 150 LED User's Guide

Indigo 150 LED ORDERCODE 41379

8 Multiple Indigo’s (Master/Slave control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.

9 4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit

10 The Indigo 150 LED can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel

11 Menu Overview

12 Main Menu Options 1. 2. 3. 4. 5. 6. 1. Intro DMX Addressing With this menu you can set the DMX

13 Built-in Programs Mode With this menu you can select 5 different Programs when using the Indigo. 1) Press Menu, until the display sho

14 Channels Advanced/Basic Mode 1) Press Menu, until the display shows: Intro 2) Press Enter and use the Up/Down buttons to go to the Channels me

15 3. Range 1) Press Menu, until the display shows: Range 2) Press Enter and use the Up/Down buttons to scroll through: P/Start, P/Finish, T/Start

16 5. Edit 1) Press Menu, until the display shows: Edit 2) Press Enter and use the Up/Down buttons to scroll through the options: Step, Pan, Til

17 DMX Protocol 12 Channels (Advanced ) Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Grad

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Indigo 150 LED brings excitement to any venue. Whether you wan

18 Channel 8 – Rotation Gobo 0-2 No Rotation 3-6 Slowest rotation 7-128 Forwards gobo rotation from slow to fast 129-132 No Rotation 133-136 Backwar

19 DMX Protocol 9 Channels (Basic) Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual h

20 Channel 8 – Shutter / Strobe (Dimmer must be open ) 0-31 Shutter closed / Blackout 32-63 Shutter open 64-95 Strobe effect, from slow to

21 Channel settings Beam Angle Fig. 6 Maintenance The operator has to make sure that safety-relating and machine-technical installations are

22 monthly with a soft brush. Please clean internal components once a year with a light brush and vacuum cleaner. Keep connections clean. Disconnect

23 Glass Gobo Orientation Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring). Textured gobos are i

24 No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 1. Check the DMX

25 Product Specification Model: Showtec Indigo 150 LED Voltage: 240V-50Hz (CE) Power Consumption: 20W Fuse: T1,5A / 250V Dimensions: 210x245x370mm (L

1 2 2 4 4 5 5 6 6 7 7 7 7 7 7 8 8 9 9 10 10 10 11 12 12 12 12 12 13 13 13 13 13 13 14 14 14 14 15 15 16 16 17 17 19 21 21 21 22 22 23 23 23 2

2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all

3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod

4 OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will

5 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the

6 Description of the device Features The Showtec Indigo 150 LED is a moving-head with high output and great effects. • Compact and attractive desig

7 Backside Fig. 2 3 4 5 6 3) IEC power connector + Fuse 1,5A 250V 4) On/Off 5) DMX s