SHOWTEC LED Wash Ultra Bright RGB User's Guide Page 1

LED Wash Ultra Bright RGB ORDERCODE 42454

8 FUNCTIONS: There are 4 options for using the LED Wash Ultra Bright RGB: Stand-alone Music-controlled Master / Sla

9 DMX Dipswitch Settings DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set by flipping

10 #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1#8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1#7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1#6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1#1 #2 #3 #

11 DMX Channels Channel 1 – Dimmer / Strobe / Sound controlled Channel 2 – Red Channel 3 – Green Channel 4 – Blue Maintenance The LE

12 Product Specification Model: Showtec LED Wash Ultra Bright RGB Power; 34W Power Supply 230V Ac/50Hz Fuse: 0,5A 252 LEDs (52 Red, 116 Green, 84 Bl

Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Wash Ultra Bright RGB brings excitement to any venue. Wheth

1 2 2 3 4 5 5 6 6 6 6 7 9 11 11 11 11 12 Showtec Showtec LED Wash Ultra Bright RGB™ Product Guide Warning...

2 WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved

3 Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Ch

4 Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installat

5 Description of the device Features The LED Wash Ultra Bright RGB is a LED system from Showtec. • Ultra bright LED • 252X High Power LED's (52

6 Backside Fig. 2 1) Earth 2) Power Cable 3) Fuse 0,5A 4) 3-pin DMX signal connector (IN) 5) 3-pin DMX signal connector (OUT) 6) Dip

7 Multiple LED Wash Ultra (DMX Control) 1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp bolted onto the Sho