SHOWTEC LED Wash Ultra Bright RGB User's Guide Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
11
DMX Channels
Channel 1 Dimmer / Strobe / Sound controlled
Channel 2 Red
Channel 3 Green
Channel 4 Blue
Maintenance
The LED Wash Ultra Bright RGB requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below to do
so.
1. Unplug the unit from electric power source.
2. Insert a screwdriver into the slot in the fuse cover. Turn the screwdriver to the left, at the same time
gently push a bit (Turn and Push). The fuse will come out.
3. Remove the broken fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover.
Be sure to use a fuse of the same type and specification. See the product specification label for
details.
Troubleshooting
Showtec LED Wash Ultra Bright RGB
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
If the light effect does not operate properly, refer servicing to a technician.
1. If the device does not operate properly, unplug the device.
2. Check the fuse, power from the wall, all cables etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the LED Wash Ultra Bright RGB,
as this may damage the unit and the warranty will become void.
5. Return the device to your Showtec dealer.
0-189
Dimmer, from closed to open (0-100%)
190-250
Strobe 1-20 Hz
251-255
Sound-controlled
0-255
Gradual color brightness from 0 to 100%
0-255
Gradual color brightness from 0 to 100%
0-255
Gradual color brightness from 0 to 100%
Page view 12
1 2 ... 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments