SHOWTEC LED Wash Ultra Bright RGB User's Guide download pdf (Page 13)

DMX Dipswitch Settings

DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set

by flipping the appropriate DMX dipswitches.

You need to know that DMX address settings are the sum of the dip switch values.

A standard DMX address for a Showtec LED Wash Ultra, which has 5 channels is as follow:

Example

LED Aircone Address Value DMX Dip Switches "ON"

Unit 5 21 #1, #3, #5

Switch Value

#1 1

#3 4

#5 16 +

Total sum 21

Explanation: Since each unit has 5 channels, each address advances 5 values (See Address Value

above).

Once address values are determined, add DMX dipswitch values to obtain the appropriate address

(DMX Dip Switches "ON") for each unit. Flip appropriate DMX dipswitches on each unit.

Example:

1. If you want to give an LED Wash Ultra DMX address133, you first have to find the number 133 in the

DMX Chart.

2. Then look at the left side (Dip Switches #1-#5) horizontally from 133.

In the Table you’ll see #1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.

3. Finally look at the upper side of the table (Dip Switches #6-#9) vertically from 133.

In the Table you’ll see #6=OFF, #7=OFF, #8=ON, #9=OFF.

DMX Address Quick Reference Chart

#9 0 0 0 0 0 0

#8 0 0 0 0 1 1

#7 0 0 1 1 0 0

#6 0 1 0 1 0 1

#1 #2 #3 #4 #5

0 0 0 0 0 32 64 96 128 160

1 0 0 0 0 1 33 65 97 129 161

0 1 0 0 0 2 34 66 98 130 162

1 1 0 0 0 3 35 67 99 131 163

0 0 1 0 0 4 36 68 100 132 164

1 0 1 0 0 5 37 69 101 133 165

0 1 1 0 0 6 38 70 102 134 166

DMX DIP SWITCH SET

0=OFF

1=ON

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

SHOWTEC LED Wash Ultra Bright RGB User's Guide Page 13