SHOWTEC Light Desk Pro 136 User's Guide download pdf (Page 15)

One/mix/seq (31)

1) ONE MODE

When the “one” function has been selected, the last selected chase will run. The LED will be off.

2) MIX MODE

When the “mix” function has been selected (LED is on), multiple “chases” will run at the same time. All

selected chases will run.

3) SEQUENCE MODE

When the “seq” function has been selected (LED is flashing), all “chases” will run after each other. The

active “chase” at that time is shown by a flashing LED above that particular “chase”.

Note: Switching between “mix”-mode or “sequence”-mode is only possible when all “chases” have been de-

selected!

Auto

When the AUTO function (29) has been selected, all programmed “scenes” will follow each other, like one

big “chase”.

The speed can be set with the right “speed”-fader.

Setup Menu Layout

The Setup menu has 6 functions. You can set these functions by holding down the “setup”-button for 5

seconds. By using the UP/DOWN buttons (17 & 18) you can walk through the menu:

1) CF Card

2) ASSIGN CH

3) P/T FADE ONLY

4) DISPLAY MODE

5) MIDI CH

6) ASSIGN LIST

CF-CARD

The CF-Card is a back-up option. You can put programs on the CF-card or backup programs, and they can

be reinstated later.

Ordercode 50449

Store Data

With the UP/DOWN buttons (17 & 18) you have to choose “CF CARD” (option 1) in the set up menu and

then press the “record” button.

Then with the UP/DOWN buttons (17 & 18) you have to choose “STORE TO CF” (option 2)

With the UP/DOWN buttons (17 & 18) you can now select what needs to be stored on the CF-card and then

press the “record” button again.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

No comments

SHOWTEC Light Desk Pro 136 User's Guide Page 15