DMX Protocol
Channel 1 - Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 540° and stopped at any position you wish.
Channel 2 - Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 230° and stopped at any position you wish.
Channel 3 – Pan/Tilt Speed
From Max Speed (0) to Min. Speed (255) in vector mode
Channel 4 – White
Gradual adjustment White from 0 – 100%
Channel 5 – Amber
Gradual adjustment Amber from 0 – 100%
Channel 6 – White/Amber, Auto Mode, Sound-active
Built-in Auto Program 5 (No Pan & Tilt)
Built-in Auto Program 6 (No Pan & Tilt)
Built-in Auto Program 7 (No Pan & Tilt)
Built-in Auto Program 8 (No Pan & Tilt)
When CH6 is 0-24: CH4 White, CH5 Amber, CH7 Master Dimmer, CH8 Strobe.
When CH6 is 25-224: CH8 Auto Speed.
When CH6 is 225-255: CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 are invalid.
Channel 7 – Master Dimmer (When CH6 = 0 - 24)
Channel 8 – Strobe (When CH6 = 0 - 24)
Strobe effect, from slow to fast (0-10 flashes/sec.)
Channel 8 – Auto Speed (When CH6 = 25 - 224)
Auto Speed from fast to slow
Channel 9 – Pan fine 16 bit (2,4°)
Channel 10 – Tilt fine 16 bit (2,4°)
NOTE: CH4, CH5 and CH7 are dimmer channels.
When CH4, CH5 or CH7 = 0 there is no output
Comments to this Manuals