SHOWTEC MiniMax 250 User's Guide download pdf (Page 18)

Troubleshooting

No Light, No Movement - All Products

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

If the light effect does not operate properly, refer servicing to a technician.

Response: Suspect two potential problem areas: the power supply, the LEDS.

1. Power supply. Check that the unit is plugged into an appropriate power supply.

2. The LEDs. Return the Mini Max LED White to your Showtec dealer.

No Response to DMX

Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card

malfunction.

1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.

Try your DMX control again.

2. Determine whether the controller or light effect is at fault. Does the controller operate properly with

other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light

effect to a qualified technician.

1 2 ... 13 14 15 16 17 18 19 20

No comments

SHOWTEC MiniMax 250 User's Guide Page 18