SHOWTEC MiniMax 250 User's Guide download pdf (Page 9)

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to

run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined

number of channels required by all the fixtures on a serial data link determines the number of fixtures the

data link can support.

The Mini Max LED White uses 10 channels.

Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the

EIA-485 standard no more than 32 devices should be connected on one data link.

Connecting more than 32 fixtures on one serial data link without the use of a DMX optically

isolated splitter may result in deterioration of the digital DMX signal.

Maximum recommended serial data link distance: 500 meters

Maximum recommended number of Mini Maxs on a serial data link: 32 fixtures

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

SHOWTEC MiniMax 250 User's Guide Page 9