SHOWTEC MiniMax 250 User's Guide Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 21
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
12
Control Panel Functions
Channel Mode
6 or 7 Channels
Fig. 6
Explanation Menu Codes
ADDR: This allows you to change the start address from 1-512
MODE: This allows you to change the control mode: M-DM = DMX Mode
M-SO = Sound-Active Master
M-AU = Stand-alone
M-SL = Sound-Active Slave
rPAN: This allows you to change the PAN direction: REV = Reverse
STND = Standard
rTILT: This allows you to change the TILT direction: REV = Reverse
STND = Standard
r-PT: This allows you to change the PAN and TILT direction simultaneously: REV = Reverse
STND = Standard
nchn: This allows you to control the ELC lamp via DMX: 7 CH = Lamp controlled via DMX
6 CH = Lamp controlled via fixture
TEST: This allows the user to test device’s features without a DMX-signal: PAN = Test the PAN movement
TILT = Test the TILT movement
COL = Test the color-wheel
GOBO = Test the gobo-wheel
SHUT = Test the shutter
DSPL: This allows you to change the display orientation and flip it 180º: REV = Reverse
STND = Standard
REST: This allows you to reset the fixture
To set the control address
1. Scroll to Addr in the main menu and press ENTER. The current address is displayed.
2. Scroll to the address that is assigned to the fixture on the controller. Press ENTER to activate the address
setting.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments