SHOWTEC Phantom 250 Spot User's Guide

Browse online or download User's Guide for Floodlights SHOWTEC Phantom 250 Spot. SHOWTEC Phantom 250 Spot Product guide User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Phantom 250 Spot V4

Phantom 250 Spot V4 ORDERCODE 40167

Page 2

8 Installation Installing the Lamp The Showtec Phantom uses the MSD 250 (ordercode 80920P / 80920O / 80933O / 82603 / 80935) reflectorbulb as manufa

Page 3 - Showtec

9 Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure t

Page 4 - WARNING

10 DMX Protocol 10 Channels (BASIC) Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head

Page 5

11 Channel 6 – Shutter / Strobe (Dimmer must be open ) 0-7 Shutter closed / Blackout 8-22 Shutter open 23-85 Strobe effect, from slow to fa

Page 6 - OPERATING DETERMINATIONS

12 DMX Protocol 14 Channels (ADVANCED) Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual h

Page 7 - Return Procedure

13 Channel 8 – Rotating gobo index, rotating gobo rotation Channel 9 – Shutter / Strobe (Dimmer must be open ) 0-7 Shutter closed / Bla

Page 8 - Description of the device

14 200-209 Effect 20 210-219 Effect 21 220-229 Effect 22 230-239 Effect 23 240-249 Effect 24 250-255 Effect 25 Channel 13 – Prism 0-15 No function

Page 9

15 Controlling: After having addressed all Phantom fixtures, you may now start operating these via your lighting controller. Note: After switching on

Page 10 - B C

16 Menu Overview

Page 11 - Set Up and Operation

17 User Modes DMX Mode: select DMX address 001-512 Fast / Slow Auto Mode Master Mode: master mode sound control Master Mode: easy controller mod

Page 12

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Phantom brings excitement to any venue. Whether you want simple

Page 13

18 Channels settings Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a

Page 14

19 Changing the Lamp 1. Disconnect mains power supply. Loosen the 2 screws on the back of the housing. 2. Gently remove the small metal housing. 3.

Page 15

20 Troubleshooting No Light, No Movement - All Products This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carr

Page 16 - Control Mode

21 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · C

Page 17

22 Product Specification Model: Showtec Phantom Voltage: 240V-50Hz (CE) Fuse: 5A / 250V Dimensions: 410x420x420mm (LxWxH) Weight: 20,4 kg Operation

Page 19 - User Modes

1 2 2 4 4 5 5 6 6 7 8 8 8 9 9 9 10 10 12 14 14 14 16 17 17 17 18 18 19 19 19 20 20 20 22 Showtec Showtec Phantom™ Product Guide Warning.

Page 20 - Maintenance

2 Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are pre

Page 21 - Fig. 8

3  Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.  Do not insert objects into air vents.  Do not

Page 22 - Troubleshooting

4 OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve y

Page 23

5 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the

Page 24 - Product Specification

6 Description of the device Features The Showtec Phantom is a moving-head with high output and great effects. • 1 Color-wheel with 7 colored gobos,

Page 25

7 Backside 2 3 4

Comments to this Manuals

No comments