Phantom 250 Spot ORDERCODE 40167
8 Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure t
9 DMX Protocol Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one
10 Channel 9 – Shutter / Strobe 0-7 Shutter closed / Blackout 8-22 Shutter open 23-85 Strobe effect, from slow to fast (0-10 flashes/sec.) 86-100 Sh
11 Channel 13 – Prism 0-15 No rotation 16-239 Backwards rotation from fast to slow 240-255 Prism Channel 14 – Focus 0-255 From close distance to f
12 Controlling: After having addressed all Phantom fixtures, you may now start operating these via your lighting controller. Note: After switching on
13 Menu Overview
14 User Modes DMX Mode: select DMX address 001-512 Auto Mode Master Mode: master mode sound control Master Mode: easy controller mode Slave Mod
15 Channels settings Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an
16 Changing the Lamp 1. Disconnect mains power supply. Loosen the 2 screws on the back of the housing. 2. Gently remove the small metal housing. 3.
17 Troubleshooting No Light, No Movement - All Products This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carr
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Phantom brings excitement to any venue. Whether you want simple
18 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · C
19 Product Specification Model: Showtec Phantom Voltage: 240V-50Hz (CE) Fuse: 5A / 250V Dimensions: 410x420x420mm (LxWxH) Weight: 20,4 kg Operation
1 2 2 3 4 5 5 5 7 7 7 8 8 8 9 11 11 11 13 14 14 14 15 15 16 16 16 17 17 17 19 Showtec Showtec Phantom™ Product Guide Warning...
2 WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved
3 Always keep case closed while operating. Always allow free air space of at least 50 cm around the unit for ventilation. Always disconnect pow
4 Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installati
5 Description of the device Features The Showtec Phantom is a moving-head with high output and great effects. • 1 Color-wheel with 7 colored gobos,
6 Backside 2 3 4
7 Installation Installing the Lamp The Showtec Phantom uses the MSD 250 (ordercode 80920P / 80920O / 80933O / 82603 / 80935) reflectorbulb as manufa
Comments to this Manuals