Octostrip V2 ORDERCODE 42220
8 2) F / S Adjust Chase Fade Time from 0-100%. Adjust Chase Speed from 0-500/min. Stand-alone Operation Refer to the four button
9 DMX Operation Press the MODE button to view the DMX address setting rnenu: Select the DMX starting address for the controller using the UP
10 DMX Modes Press the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode. DMX Mode 1 : 48-channe
12
13 Maintenance The LED Octostrip requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then
14 Product Specification Model: Showtec Controller for LED Octostrip Voltage: AC 230V-50Hz (CE) Power: 200W 4 different DMX Modes (48 Channels, 24 ch
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Octostrip brings excitement to any venue. Whether you want
1 2 2 3 4 5 5 6 6 6 7 7 7 7 8 8 8 9 10 13 13 13 13 14 Showtec Showtec LED Octostrip™ Product Guide Warning...
2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all
3 Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution!
4 Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installat
5 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly
6 Description of the device Features The LED Octostrip is a LED system from Showtec. • 8x Octostrip and 1x controller • 4x5 meter DC / Signal cable
7 Installation Remove all packing materials from the LED Octostrip. Check that all foam and plastic padding is removed. Connect all cables. Always d
Comments to this Manuals