SHOWTEC Galactic Bluestar MKII DMX User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 23
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
USER MANUAL
21
TROUBLE SHOOTING
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
z The fixture does not work, no laser and the fan does not work.
1) Check the connect power.
2) Measure the mains voltage on the main connector.
3) Check the power on indicated LED.
z The fixture is power on, but no laser coming out from aperture.
1) Check the laser aperture cover.
2) Check the key switch.
3) Check the remote interlock or interlock connector.
4) Wait for at least 30 minutes to warm up in low temperature.
z The laser effect power is very weak.
1) Wait for at least 30 minutes to warm up in low temperature.
2) Clean the scanner mirror with alcohol.
3) Clean the aperture glass with alcohol.
z The laser is on, but the pattern is not moving.
1) Try to change the fixture to another stand alone mode.
Page view 21
1 2 ... 17 18 19 20 21 22 23

Comments to this Manuals

No comments