SHOWTEC Galactic GVC-190 User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 21
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
13
1. DMX Mode
With this menu you can set the DMX address.
1) Press the FUNC button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) Use the ENTER button to store your setting.
2. Slave Mode
With this menu you are able to set the device as a slave device.
1) Press the FUNC button, until the display shows .
2) Use the ENTER button to store your setting.
3. Run Test
1) Press the FUNC button, until the display shows .
2) When you press ENTER, the device will start an internal test.
4. Built-in Programs Mode / Sound Mode
1) Press the FUNC button, until the display shows .
2) Use the Up / Down buttons to scroll through the entire menu.
Automatic Program with single Green, Violet, Cyan colors.
Automatic Program with single Green color.
Automatic Program with single Violet color.
Automatic Program with Cyan colors.
Sound Activated Program with single Green, Violet, Cyan colors.
Sound Activated Program with single Green color.
Sound Activated Program with single Violet color.
Sound Activated Program with Cyan colors.
3) Use the ENTER button to store your setting.
5. Sensitivity Mode
With this menu you can set the Audio Sensitivity.
1) Press the FUNC button, until the display shows .
2) You can choose 10 different Audio Sensitivity levels.
Use the Up / Down buttons to select the required address from .
is no audio activation.
is audio sensitivity, from low to highly sensitive.
3) Use the ENTER button to store your setting.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments