SHOWTEC Stage Master Pro User Manual download pdf (Page 11)

Getting acquainted

Basic Control Parts

Fixture Buttons(1-16)

These 16 buttons play multi-purpose functions depending on the operating mode.

Only one function is selected at a time and the LED will be lit accordingly. There

are four statuses:

The LED lights up, indicating the fixture can not be switched off unless it is activated.

The LED blinks steadily, indicating the fixture can be enabled by channel faders.

The LED blinks briefly, indicating the fixture is a part of the scenes or shows.

The LED blinks from time to time, indicating the fixture is frozen.

Scene Buttons(1-16)

These 16 buttons can be used for Scene Menu and Show Edit menu.

Scene Bank buttons(1-4/ 5-8)

Faders (1-16)

These 16 faders can be used to control the 16 individual DMX channels of the fixtures.

Fixture Bank Buttons(1-4)

These four buttons are used in combination with the fixture buttons to choose the

fixture between 1 and 64.

Joystick

This joystick is used to control the Pan or Tilt movement of the fixtures.

Channel Buttons(1-16)

These buttons are used to select channel between 1 and 16. Furthermore, they can

be used to direct access the tabset values at each pressing.

These four buttons control two settings: they refer to bank 1-4 when the LEDs light

up; they refer to bank 5-8 when the LEDs blink.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

No comments

SHOWTEC Stage Master Pro User Manual Page 11