SHOWTEC 41200 User's Guide

Octostrip ORDERCODE 42220

8DMX ModesPress the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to selectthe DMX mode.DMX Mode 1 : 48-channel operati

9MaintenanceThe LED Octostrip requires almost no maintenance. However, you should keep the unit clean. Disconnectthe mains power supply, and then wipe

10Product SpecificationModel: Showtec Controller for LED OctostripVoltage: AC 230V-50Hz (CE)Power: 200W4 different DMX Modes (48 Channels, 24 channels

11Other Showtec Products:LED Tube (41000)LED Cove Tube (41005)LED Wallpainter (41200)LED Aqua Painter (41220)Octopod 90 (30987)

2006 Showtec.

Congratulations!You have bought a great, innovative product from Showtec.The Showtec LED Octostrip brings excitement to any venue. Whether you want s

122344455556667899910ShowtecShowtec LED Octostrip™ Product GuideWarning..…...

2WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the inst

3• Make sure that the available voltage is not higher than stated on the rear panel.• Make sure that the power-cord is never crimped or damaged. Che

4Description of the deviceFeaturesThe LED Octostrip is a LED system from Showtec.• 8x Octostrip and 1x controller• 4x4 meter DC / Signal cable and 4x8

5InstallationRemove all packing materials from the LED Octostrip. Check that all foam and plastic padding is removed.Connect all cables.Always disconn

62) F / SAdjust Chase Fade Time from 0-100%.Adjust Chase Speed from 1-500/min.Stand-alone OperationRefer to the four buttons on the front panel of the

7DMX OperationPress the MODE button to view the DMX address setting rnenu:Select the DMX starting address for the controller using the UP and DOWN but