Octostrip ORDERCODE 42220
8DMX OperationPress the MODE button to view the DMX address setting rnenu:Select the DMX starting address for the controller using the UP and DOWN but
9DMX ModesPress the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode.DMX Mode 1 : 48-channel operat
12MaintenanceThe LED Octostrip requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wi
13Product SpecificationModel: Showtec Controller for LED OctostripVoltage: AC 230V-50Hz (CE)Power: 200W4 different DMX Modes (48 Channels, 24 channels
14Other Showtec Products:LED Tube (41000)LED Cove Tube (41005)LED Wallpainter (41200)LED Aqua Painter (41220)Octopod 90 (30987)
15Sehr geehrter Kunde,vielen Dank, dass Sie sich für ein Produkt von Showtec entschieden haben. Sie werden an dem Single 3 viel Freude haben. Sollten
1617171819191920202020212121222326262627ShowtecShowtec LED Octostrip™ Produkt-AnleitungWarnung..…...
17ACHTUNG! Seien Sie besonders vorsichtig beim Umgang mit gefährlicher Netzspannung. Bei dieser Spannung können Sie einen lebensgefährlichen elektrisc
115English……………………………………………………………………………….……Deutsch……………………………………………………………………………………………..…
18 Vermeiden Sie Flammen und setzen Sie das Gerät nicht nah an feuergefährliche Flüssigkeiten oder Gase. Um eine ausreichende Belüftung zu gewährlei
19GERÄTEBESCHREIBUNGFeaturesDer LED Octostrip ist ein LED-System von Showtec.• 8x Octostrip und 1x Controller• 4x4m DC/Signalkabel und 4x8m DC/Signalk
20InstallationEntfernen Sie das ganze Verpackungsmaterial vom LED-Octostrip und schließen Sie alle Kabel an.Trennen Sie immer das Gerät von der elektr
212) F / SRegulieren Sie die Chase-Fade-Time von 0-100%.Regulieren Sie die Chase-Geschwindigkeit von 1-500/min.Stand-alone BedienungSchauen Sie auf di
22DMX-BedienungDrücken Sie die MODE-Taste, um das DMX-Adreß-Einstellungsmenü zu sehen:Wählen Sie die DMX-Startadresse für den Controller, indem Sie di
23DMX ModusDrücken Sie die MODE-Taste, um das DMX-Modus Auswahlmenü zu sehen. Wählen Sie den DMX-Modus mit den UP- und DOWN-Tasten.DMX Modus 1 : 48-Ka
26WartungDer Showtec LED Octostrip benötigt fast keine Wartung. Sie sollten das Gerät jedoch sauber halten. Trennen Sie das Gerät vom Netz und wischen
27ProduktbeschreibungModell: Showtec Controller für LED OctostripVoltage: AC 230V-50Hz (CE)Power: 200W4 verschiedene DMX-Modi (48 Kanäle, 24 Kanäle, 1
1Congratulations!You have bought a great, innovative product from Showtec.The Showtec LED Octostrip brings excitement to any venue. Whether you want s
28Andere Showtec Produkten:LED Tube (41000)LED Cove Tube (41005)LED Wallpainter (41200)LED Aqua Painter (41220)Octopod 90 (30987)
2007 Showtec.
233455566667778912121213ShowtecShowtec LED Octostrip™ Product GuideWarning..…...
3WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the ins
4 Make sure that the device is not exposed to extreme heat, moisture or dust. Make sure that the available voltage is not higher than stated on the
5Description of the deviceFeaturesThe LED Octostrip is a LED system from Showtec.• 8x Octostrip and 1x controller• 4x4 meter DC / Signal cable and 4x8
6InstallationRemove all packing materials from the LED Octostrip. Check that all foam and plastic padding is removed. Connect all cables.Always discon
72) F / SAdjust Chase Fade Time from 0-100%.Adjust Chase Speed from 1-500/min.Stand-alone OperationRefer to the four buttons on the front panel of the
Comments to this Manuals