Octostrip ORDERCODE 42220
8DMX ModesPress the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode.DMX Mode 1 : 48-channel operat
10
11MaintenanceThe LED Octostrip requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wi
12Product SpecificationModel: Showtec Controller for LED OctostripVoltage: AC 230V-50Hz (CE)Power: 200W4 different DMX Modes (48 Channels, 24 channels
13Other Showtec Products:LED Tube (41000)LED Cove Tube (41005)LED Wallpainter (41200)LED Aqua Painter (41220)Octopod 90 (30987)
2007 Showtec.
Congratulations!You have bought a great, innovative product from Showtec.The Showtec LED Octostrip brings excitement to any venue. Whether you want si
122344455556667811111112ShowtecShowtec LED Octostrip™ Product GuideWarning..…...
2WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the ins
3 Make sure that the device is not exposed to extreme heat, moisture or dust. Make sure that the available voltage is not higher than stated on the
4Description of the deviceFeaturesThe LED Octostrip is a LED system from Showtec.• 8x Octostrip and 1x controller• 4x4 meter DC / Signal cable and 4x8
5InstallationRemove all packing materials from the LED Octostrip. Check that all foam and plastic padding is removed. Connect all cables.Always discon
62) F / SAdjust Chase Fade Time from 0-100%.Adjust Chase Speed from 1-500/min.Stand-alone OperationRefer to the four buttons on the front panel of the
7DMX OperationPress the MODE button to view the DMX address setting rnenu:Select the DMX starting address for the controller using the UP and DOWN but
Comments to this Manuals