Phantom 75 LED Spot ORDERCODE 40188 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +
8 Backside Fig. 2 3 4 5 3) IEC power connector + Fuse F3A 250V 4) DMX signal connect
9 Control Modes There are 4 modes: • Stand-alone (built-in programs) • Sound-controlled • Master/Slave • DMX512 (14 Channels ADVANCED or 8 chann
10 Multiple Phantoms (DMX Control) 1. Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 2. Alway
11 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show
12 Control Panel Fig. 5 A. LCD Display D. Down Button B. MODE/ESC button E. ENTER Button C. Up Button
13 Menu Overview
14 Main Menu Options DMX address Built-in Programs Slow/Fast/Sound-control/Slave Pan/Reverse Pan Tilt/Reverse Tilt Display/Reverse Di
15 Built-in Programs Mode You can select 4 different Programs when using the Phatom. Press MODE until the display shows ,then pre
16 Tilt Mode When the display shows : , the Tilt is 270º. When you press Up/Down and the display shows , the Pan i
17 DMX Channels 14 Channels Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head ad
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Phantom 75 LED Spot brings excitement to any venue. Whether
18 Channel 9 – Rotating Gobo-wheel + Gobo Shake 0-7 Open / White 8-15 Gobo 1 (Glass) 16-23 Gobo 2 (Glass) 24-31 Gobo 3 (Metal) 32-39 Gobo 4 (Metal)
19 Channel 13 – Prism 0-7 Open 8-12 3-facet Prism Effect 13-130 Clockwise rotation (CW) prism effect from slow to fast 131-247 Counter-clockwise rot
20 Channel 6 – Rotating Gobo-wheel + Gobo Shake 0-7 Open / White 8-15 Gobo 1 (Glass) 16-23 Gobo 2 (Glass) 24-31 Gobo 3 (Metal) 32-39 Gobo 4 (Metal)
21 Maintenance The Showtec Phantom 75 LED Spot requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s ligh
22 Fig. 8 3. Loosen the service lid of the housing, by sliding it to the left/right. 4. Gently tilt the he
23 Rotating Gobo-wheel Colorwheel 1 8
24 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture •
25 Product Specification Model: Showtec Phantom 75 LED Spot Input Voltage: 100-240 VAC Continuous Power 170 Watt Fuse: F3A / 250V Dimensions: 338 x 2
1 Showtec Showtec Phantom 75 LED Spot ™ Product Guide Warning ...
2 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all
3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod
4 Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve
5 Mounting a clamp to the underside of the Phantom moving head Improper installation can cause serious damage to peop
6 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearl
7 Description of the device Features The Showtec Phantom 75 LED Spot is a moving-head with high output and great effects. • LED source the shutter i
Comments to this Manuals