SHOWTEC Phantom 575 Pro EB User's Guide

Club Spot 575 ORDERCODE 40135

8InstallationInstalling the LampThe Showtec Club Spot 575 uses the HMI 575 (ordercode 80901O) reflectorbulb as manufactured by allpopular manufacturer

9Set Up and OperationFollow the directions below, as they pertain to your preferred operation mode.Before plugging the unit in, always make sure that

10Fig. 5

11DMX ProtocolChannel 1 – ColoursLinear color change following the movement of the slider. In this way you can stop the color-wheel in anyposition – a

12Channel 4 – Static Gobos0-8 Open / white9-15 Gobo 116-23 Gobo 224-31 Gobo 332-39 Gobo 440-47 Gobo 548-55 Gobo 656-63 Gobo 764-71 Open / white72-79 G

13The Club Spot 575 can be operated with a controller in control mode or without the controller in stand-alone mode.Control PanelWhen the indicator li

14 Dmx Mode: DMX Mode: Light 1 Light 2 Master Mode: Slave Mode: Sound-control Slave 1 Master Mode: Slave-Mode Slow Slave 2 Master

15Remotely controllable functionsColour-wheelThe Club Spot contains a colour-wheel with 7 colours and white. The colour-wheel can be positionedbetween

16Gobowheel Static Gobowheel Rotating Fig. 8 Fig. 9 Colorwheel Fig. 10

17MaintenanceThe operator has to make sure that safety-relating and machine-technical installations are to be inspectedby an expert after every four y

Congratulations!You have bought a great, innovative product from Showtec.The Showtec Club Spot 575 brings excitement to any venue. Whether you want si

18Replacing a GoboGobo-wheel with rotating gobo’s1. Disconnect mains power supply and set the switch to OFF.2. Make sure that the gobo you want to ins

19Problem Probable cause(s) RemedyNo power to the fixture ·Check that power is switched on and cables are plugged in.One or morefixtures arecompletely

20Product SpecificationModel: Showtec Club Spot 575Voltage: 240V-50Hz (CE)Power: 800WFuse: 10A / 250VDimensions: 360x325x530mm (LxWxH)Weight: 25 kgOpe

2005 Showtec.

12234667889991113131314151515161717171818181820ShowtecShowtec Club Spot 575™ Product GuideWarning..…...

2WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the inst

3• Only operate the fixture after having checked that the housing is firmly closed and all screws aretightly fastened.• Only operate the device afte

4RiggingPlease follow the European and national guidelines concerning rigging, trussing and all other safety issues.Do not attempt the installation yo

5Mounting a clamp to the underside of the club Spot moving head1) Clamp2) Safety-cable3) Eye bolt4) Mounting plateImproper installation can cause seri

6Description of the deviceFeaturesThe Showtec Club Spot 575 is a moving head with high output and great effects.• 1 Color-wheel with 7 colored gobos,

7Backside 4 5 6 7Fig. 24) DMX signal connector (OUT)5) DMX signal connector (IN)6) IEC power connector7) ON / OFF