SHOWTEC LED Music Tube Controller User's Guide download pdf (Page 13)

Troubleshooting

No Light

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

If the light effect does not operate properly, refer servicing to a technician.

Response: Suspect three potential problem areas: the power supply, the controller and the LEDs.

1. The power supply. Check that the unit is plugged into an appropriate power supply.

2. The controller. Disconnect the controller and connect the power supply directy to the Magic Icecycle.

The Magic Icecycle should run the standalone pattern. If the controller is not functioning, return the

device to your Showtec dealer.

3. The LED. Return the device to your Showtec dealer.

Product Specification

Model: Showtec Magic Icecycle

• Play traditional snowfall effects as well as several other built in effects

• Dipswitch selectable programs

• Indoor and outdoor use

• Plug & play set with 18 tubes

• Long-life LEDs around 20.000 hr.

• Input voltage: AC 230V

• Power consumption: 22W

• Tube length: 825mm

• Tube diameter: 15mm

• Max. distance between tubes: 340mm

• Max. width when unfold: 5,5m

• Controller size: 50x50x195mm

• Light source: 5mm LEDs, 120 degree

• IP Rating: IP44 (protected against splashing water)

• Visual angle: 360 degrees

• Control: Dedicated controller (included)

• Programs: 1 automatic, 7 sound active

• Weight: 5,3 kg (total set of 18 tubes)

Minimum distance:

Minimum distance from flammable surfaces: 0.5m

Minimum distance to lighted object: 1m

Design and product specifications are subject to change without prior notice.

Website: www.Showtec.info

1 2 ... 8 9 10 11 12 13 14

No comments

SHOWTEC LED Music Tube Controller User's Guide Page 13