SHOWTEC LED Par 64 Short DMX User Manual download pdf (Page 8)

LEDJ PAR CAN 56 CONTROL OPTIONS

DMX Control Mode

Set the start address using the group of dip switches located usually on the back of the xture.

Each dipswitch has an associated value. Adding the value of each switch in the ON position will

provide the start address. Determining which switches to toggle ON given a specic start address

can be accomplished in the following manner. By subtracting the largest switch value possible

from the selected start address until zero is achieved.

EXAMPLE STARTING ADDRESS

Address 10

Pin NO: 4 = 8

Pin NO: 2 = 2

Total = 10

Address 24

Pin NO: 5 = 16

Pin NO: 4 = 8

Total = 24

DMX address using

simple maths

233 - (128 = 105, Turn on dip No: 8

105 - (64) = 41, Turn on dip No:7

41 - (32) = 9, Turn on dip No: 6

9 - (8) = 1, Turn on dip No: 4

1 - (1) = 0, Turn on dip No:1

You will most likely use the first available

number which maybe Number 1. This

number was selected for

example purposes

DIP SWITCH (DMX VALUE)

128

256

1 2 3 4 5 6 7 8 9 10 11 12

No comments

SHOWTEC LED Par 64 Short DMX User Manual Page 8