Phantom 25 LED Wash ORDERCODE 40186 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +
8 Backside Fig. 2 3 4 5 6 3) IEC power connector 4
9 Control Modes There are 4 modes: • Stand-alone (built-in programs) • Sound-controlled • Master/Slave • DMX512 (15 Channels ADVANCED or 6 chann
10 Multiple Phantoms (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. 2. Always u
11 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show
12 Control Panel Fig. 5 A. LCD Display D. Down Button B. MODE/ESC button E. ENTER Button C. Up Butt
13 Menu Overview
14 Main Menu Options DMX address Built-in Programs Slow/Fast/Sound-control/Remote control/Slave Pan/Reverse Pan Tilt/Reverse Tilt Dis
15 Built-in Programs Mode You can select 5 different Programs when using the Giant LED. Press MODE until the display shows ,then
16 Tilt Mode When the display shows : , the Tilt is 270º. When you press Up/Down and the display shows , the Pan i
17 DMX Protocol 15 Channels ( ) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN).
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Phantom 25 LED Wash brings excitement to any venue. Whether
18 Channel 13 – LED Speed 0-255 Color change with from fast to slow Channel 14 – Channel Functions 0-7 No Function 8-27 Blackout during Pan/T
19 DMX Protocol 6 Channels ( ) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN).
20 Channel settings Fig. 6 Maintenance The operator has to make sure that safety-relating and machine-technical installations are to
21 Replacing a Fuse Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse burns out, the pro
22 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · C
23 Product Specification Model: Showtec Phantom 25 LED Wash Input Voltage: 100-240 VAC Peak Power 250 Watt; Continuous Power 105 Watt Fuse: F2A / 25
1 2 2 4 4 6 6 7 7 8 8 8 9 9 9 9 10 11 11 12 12 12 13 14 14 15 15 15 15 15 15 16 16 16 16 16 17 17 19 20 20 21 21 21 21 21 23 Showtec Showtec
2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all
3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod
4 OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will
5 Mounting a clamp to the underside of the Phantom moving head Improper installation can cause serious damage to peop
6 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly
7 Description of the device Features The Showtec Phantom 25 LED Wash is a moving-head with high output and great effects. • DMX-control via standard
Comments to this Manuals