SHOWTEC LED Bar DMX User Manual download pdf (Page 17)

00026099.DOC, Version 2.2

17/35

Auto Mode

In this mode, automatic program flow can be set.

Set DIP-Swich 9 and 10 to OFF.

Set DIP-Swiches 1 through 4 to OFF.

Speed can be controlled by setting the DIP-Swiches 5 and 6.

Flash can be controlled by setting the DIP-Swiches 7 and 8.

Sound Control Mode

In this mode, sound control mode can be set.

Set DIP-Swich 9 to ON and 10 to OFF.

Sensitivity can be controlled by setting DIP-Swiches 1 through 4.

Slave Mode

In this mode, you can select and set the slave devices.

Set DIP-Switch 10 to ON in order to determine the Slave device.

DIP-Swiches 1 – 9 are on OFF.

DMX-CONTROLLED OPERATION

You can control the devices individually via your DMX-controller. Every DMX-channel has a different

occupation with different features.

Addressing the Device

Set the DIP-Switch 10 to ON.

Set the DMX Addresses via DIP-Switches 1 through 9.

Controlling:

After having addressed the LED Bar RGB 252/10 Indoor, you may now start operating it via your lighting

controller.

Note:

It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to

ensure proper transmission on the DMX data link.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 34 35

No comments

SHOWTEC LED Bar DMX User Manual Page 17