SHOWTEC 30711 Matrix Blinder 5x5 User's Guide download pdf (Page 14)

Control Panel Functions

For synchronous operation of multiple fixtures the fixtures must all be connected on a data-link.

Note: Disconnect the fixtures from the DMX controller before operating, otherwise data collisions can

occur and the fixtures will not work properly!

It’s necessary to insert the XLR termination plug (with 120 Ohm ) into the input of the first fixture and into

the output of the last fixture in the data-link, in order to ensure proper transmission on the data link.

DMX Addressing

With this menu you can set the DMX address.

1) Press and hold down the Mode-button for 5 seconds. Then press the Up button, the display shows the

actual DMX address.

2) The display is now blinking. You can choose 512 different DMX addresses.

Use the Up / Down buttons to select the required DMX address from 000 – 511.

3) Press and hold down the Mode button for 5 seconds to store your address.

Mode Menu (4CH, 9CH, 25CH and 29 CH)

With this menu you can set your desired operating mode.

1) Press and hold down the Mode-button for 5 seconds. Then press the Mode-button a second time, the

display shows the actual operating mode. The display is now blinking.

2) You can choose 4 different operating DMX modes: 4 CH Basic Mode

9 CH Zone Mode

25 CH Matrix Mode

29 CH Advanced Mode

3) Use the Up / Down buttons to select the required operating mode.

4) Press and hold down the Mode button for 5 seconds to store operating mode.

Phase Correction

With this menu you can set your desired phase correction mode.

You can use this function to minimize the blinking of your light bulbs.

1) Press and hold down the Mode-button, then press Up, Up, Down, Down, Up, Down.

The display shows:

2) Use the Up / Down buttons to select a desired value.

3) Press and hold down the Mode button for 5 seconds to exit the menu.

Attention

You can only use this function if you know what you are doing. Otherwise please do not modify your

setting.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

No comments

SHOWTEC 30711 Matrix Blinder 5x5 User's Guide Page 14