SHOWTEC LED Par 64 Short DMX Troubleshooting Guide download pdf (Page 4)



Operation

For more information about working with the LED Commander, you can also view:

Link: http://www.youtube.com/showteclight

Channel Assignment

1) Press and hold the Patch/Down button (21) for 3 seconds. The Patch LED will light up red.

2) Choose channel range with the SPEED fader (23). Example: 1, 17, 33, 49, etc.

Range 17: Start at 17 and stop at 32.

3) Choose a DMX channel with the FADE fader (24).

4) Press the fixture button (1) you desire. The Fixture LED will light up blue. You can choose 8 different

fixtures.

5) Now press and release the flash button (13) from the fader you want to patch the DMX channel to.

Example:

This figure shows that DMX channel 49 is patched to the RED fader (5) of fixture 1.

6) Press Patch button for 3 seconds to exit Patch mode.

Factory Reset

1) First turn off the device.

2) Now press and hold the Record (15) button + Tap Sync (16) together.

3) Now switch on the device.

4) The display will show:

5) After 2 seconds the Fixture LEDs 4 and 8 will flash once, indicating the LED Commander is back to

factory default settings.

After the factory reset, the fixture is auto patched:

Fixture 1 Fixture 2 Fixture 3 Fixture 8

Red CH1 Red CH9 Red CH17 Red CH57

Green CH2 Green CH10 Green CH18 Green CH58

Blue CH3 Blue CH11 Blue CH19 Blue CH59

Color CH4 Color CH12 Color CH20 Color CH60

Strobe CH5 Strobe CH13 Strobe CH21 Strobe CH61

Sound CH6 Sound CH14 Sound CH22 Sound CH62

Dimmer CH7 Dimmer CH15 Dimmer CH23 Dimmer CH63

Master CH8 Master CH16 Master CH24 Master CH64

1 2 3 4 5 6 7 8 9

No comments

SHOWTEC LED Par 64 Short DMX Troubleshooting Guide Page 4