7
You can change the speed by turning the speed button (3).
faster
slower.
DMX Operation
The PowerBank will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED (2) will blink.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX cable
and the DMX controller must be turned on.
The LED PowerBank 48 system can operate as a 12-, 6-, or 3-channel DMX fixture. Select DMX Mode 1, 2,
or 3 as described on the facing page.
DMX MODE:
on 3 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 6 channel mode (R:0-100%, G:0-100%, B:0-100%)
on 12 channel mode (R:0-100%, G:0-100%, B:0-100%)
Stand-alone mode- 3 channels (25 built-in effects, speed/strobe, illumination)
Users can test Stand-alone Mode by setting the dip-switches to Stand-alone Mode, without using a DMX
controller. Users have to disconnect the DMX cables before testing Stand-alone Mode.
In DMX mode, you can adjust the audio input level, using the sensitivity control on the back panel of the
Controller.
Comments to this Manuals