SHOWTEC Lite-8 Pro User's Guide download pdf (Page 9)

50319IEC Lite-Power (mit Bulgin + IEC connectors)

1) AC Input:; Plug in appropriate power supply.

2) Audio Input: Line in 100mV-1Vpp

3) Channel Fuse: F6.3A 250V 5x20mm.

4) Channel Output: 2A /CH., 8A /Total (CE)

5) Bulgin Output

Installation

Remove all packing materials from the Lite Power Classic. Check that all foam and plastic padding is

removed. Screw the equipment into a 19" rack. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

OPERATING INSTRUCTIONS

1. Turn the power switch on.

2. Operating mode is controlled by MODE SELECT.

3. You can select operating mode from Hold Dimmer / Hold Sound / Prog Sound / Prog Speed /

Auto Speed /Auto Sound / Memory.

Hold Dimmer The corresponding LED lights.

The channel output is controlled by Channel Dimmer (8) or Master Dimmer (14)

fader.

Hold Sound The corresponding LED lights. The Channel output is controlled by the Channel

Dimmer (8) fader and the music sensitivity is adjusted by the AUDIO LEVEL

CONTROL (16).

Prog Sound The corresponding LED lights. You can select a desired program from 42 pre-set

programs by using the Prog Select button (11). Press the Prog Select button once

and the program will be increased or decreased by one. Press and hold it for 1

second and the program will be increased or decreased by 10 per second. Press

Prog Select + Mode Select (11+10) and the chasing direction will be reversed.

Prog Speed The corresponding LED lights. You can operate as described by Prog Sound

But remember the chasing speed is not controlled by an audio signal but by SPEED

CONTROL (18) or TAP SYNC (17).

Auto Speed The corresponding LED flashes. You can operate as described by Prog Speed.

However, in this mode, each program will be executed 4 times continuously and

then go to the next program.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

SHOWTEC Lite-8 Pro User's Guide Page 9