SHOWTEC MiniMax 250 User's Guide download pdf (Page 6)

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

• If the projector is lowered from the ceiling or high joists, professional trussing systems have to be

used.

• Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.

• The projector must never be fixed swinging freely in the room.

• The installation must always be secured with a safety attachment, e.g. an appropriate safety net or

safety-cable.

• When rigging, derigging or servicing the projector, always make sure, that the area below the

installation place is blocked and staying in the area is forbidden.

The MiniMax can be placed on a flat stage floor or mounted to any kind of truss by a clamp.

Mounting a clamp to the underside of the MiniMax moving head

1. Bolt a clamp to the included bracket with a grade 8.8 (minimum) M12 bolt and locknut, or as

recommended by the clamp manufacturer, through the 13 mm hole in the bracket.

2. Align the bracket with the keyholes in the base. Insert both locking pins into the holes and turn both levers

a full 1/4 turn clockwise to lock. The fasteners are locked only when turned fully clockwise.

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

Cable Pin International

BROWN FASE L

BLUE NUL N

YELLOW/GREEN EARTH

Make sure that the device is always connected properly to the earth!

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

No comments

SHOWTEC MiniMax 250 User's Guide Page 6