SHOWTEC DJ Switch 8 User's Guide download pdf (Page 12)

Dipswitch setting for DMX Mode

When all dipswitches are turned off, the DJ LED Flower is in DMX Mode.

- Dipswitches #1 - #8 control the DMX Addresses.

DMX Address

DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set

by flipping the appropriate DMX dipswitches.

You need to know that DMX address settings are the sum of the dip switch values.

A standard DMX address for a Showtec DJ LED Flower, which has 6 channels is as follow:

Example

DJ LED Flower Address Value DMX Dip Switches "ON"

Unit 5 25 #1 , #3, #4

Switch Value

#1 1

#4 8

#5 16 +

Total sum 25

Explanation: Since each unit has 6 channels, each address advances 6 values (See Address Value

above).

Once address values are determined, add DMX dipswitch values to obtain the appropriate address

(DMX Dip Switches "ON") for each unit. Flip appropriate DMX dipswitches on each unit.

Example:

1. If you want to give an DJ LED Flower DMX address 133, you first have to find the number 133 in the

DMX Chart. (See page 11)

2. Then look at the left side (Dip Switches #1-#5) horizontally from 133.

In the Table you’ll see #1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.

3. Finally look at the upper side of the table (Dip Switches #6-#9) vertically from 133.

In the Table you’ll see #6=OFF, #7=OFF, #8=ON, #9=OFF.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

SHOWTEC DJ Switch 8 User's Guide Page 12