SHOWTEC ORDERCODE 30645 User's Guide download pdf (Page 9)

MASTER-work mode

1. AUTO-Mode: Auto run program and built-in colors

(40 Colors, see Master-Color Table).

Parameter: d:XXX (000-100%): Color intensity, adjust output control.

F:XXX (000-100): Fade-Time Parameter (0-60S).

S:XXX (001-100): Run Speed Parameter (50mS/Step-60S/Step).

2. AUDIO-Mode: Music-controlled programs and built-in colors

(40 Colors, see Master-Color Table)

Parameter: d:XXX (000-100%): Color intensity, adjust output control.

F:XXX (000-100): Fade-Time Parameter (0-60S).

Sound-controlled sensitivity can be adjusted. The device has a built-in mic and a Audio Input.

3. Online-Test: Connect every unit with a 3-pin XLR cable.

One is set to Master-Work, one is set to RGB-DMX-Mode. The received address is A:001.

Online test: Connect every unit with a 3-pin XLR cable. Every unit is set to the same DMX work mode and

the received DMX addresses are the same (001-512). When a DMX signal is received, the devices

function synchronously.

Button Function

MODE: Select work mode. Press and hold the MODE-button for more than a second, the unit will translate

the work mode. When you press and hold the MODE-button longer, the unit will translate a work

mode of 1.5S (RGB, C&B, AUTO, AUDIO). The referral point on the display lights up.

UP: Press once, the Parameter adds one step. When you hold down the UP-button, the Parameter value

will increase fast.

DOWN: Press once, the Parameter decreases one step. When you hold down the DOWN-button, the

Parameter value will decrease fast.

Function Table

MODEWork Mode UP DOWN

Within 1 Sec. More than 1 Sec.

Parameter

RGB +1 -1 None Mode Translate A:XXX

C & B +1 -1 None Mode Translate A:XXX

AUTO +1 -1 Parameter select Mode Translate d:XXX F:XXX

S:XXX

AUDIO +1 -1 Parameter select Mode Translate d:XXX F:XXX

C & B-Modus = (Color & Brightness)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

SHOWTEC ORDERCODE 30645 User's Guide Page 9