SHOWTEC Studiobeam MSR-575 User's Guide download pdf (Page 4)

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow

the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

• Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the device and do not modify the device.

• Do not insert objects into air vents.

• Never use anything to cover the ground contact.

• Never look directly into the light source.

• Never leave any cables lying around.

• Never use the device during thunderstorms, unplug the device immediately.

• Do not connect this device to a dimmerpack.

• Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.

• Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

• Do not shake the device. Avoid brute force when installing or operating the device.

• Do not operate the device without a lens installed.

• Only use device indoor, avoid contact with water or other liquids.

• Only operate the fixture after having checked that the housing is firmly closed and all screws are

tightly fastened.

• Only operate the device after having familiarized with its functions.

• Avoid flames and do not put close to flammable liquids or gases.

• Always hang the device with the color frame retaining clip in the locked position.

• Always replace the lamp, when it is damaged or deformed due to the heat.

• Always keep case closed while operating.

• Always allow free air space of at least 50 cm around the unit for ventilation.

CAUTION!

Keep this device away from rain and moisture!

mains lead before o

enin

the housin

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dan

erous electric shock when touchin

the wires!

1 2 3 4 5 6 7 8 9 ... 14 15

Comments to this Manuals

No comments

SHOWTEC Studiobeam MSR-575 User's Guide Page 4

Comments to this Manuals

Related products and manuals for Floodlights SHOWTEC Studiobeam MSR-575