SHOWTEC DimMaster User's Guide download pdf (Page 10)

Troubleshooting

Showtec Showdesigner LP-416

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

1. External dimmer pack does not respond to the LP-416: Check the DMX-address of the external

dimmer pack.

6. If the device does not operate properly, unplug the device.

7. Check power from the wall, all cables, the fuse, the settings (return to default), etc.

8. If all of the above appears to be O.K., plug the unit in again.

9. If nothing happens after 30 seconds, unplug the device.

10. Return the device to your Showtec dealer.

Product Specification

Model: Showtec LP-416

Power Supply: AC 220V-240V, 50/60Hz

Power Consumption: 16A max.

Power Connector: Cable without connector

Output Power: Each channel 5A

Output Connector: 4x Schuko

1x Bulgin

Analog Output: 0-10V, 8-pole DIN

DMX-Output: 3-pin female XLR

Audio Input: Cinch

Internal Fuse: F1A 250V 5x20 mm

Output Fuses: F8A 250V 6x32mm

Weight : 5,5 kg

Design and product specifications are subject to change without prior notice.

Website: www.Highlite.nl

1 2 ... 5 6 7 8 9 10 11

No comments

SHOWTEC DimMaster User's Guide Page 10