SHOWTEC 41200 User's Guide

LED Pixelboard 500/256 ORDERCODE 101130

81) PCB2) Power supply3) Power supply mounting plate4) Mounting support B5) Rubber seal6) Plastic casing7) Mounting support A8) Handle9) Display cover

9Connecting 96 LED panels to 1 controller

10Maximum System ConfigurationOther Setup Possibilities

11Mounting System ConnectionsEach LED Pixelboard can be locked to any other panel, using the interlocking connectors at the rear of each Pixelboard.No

12Attaching the Flying BracketThe flying bracket attachment is used to rig a 1 meter section (Width) of the LED Pixelboard. It is designed to be attac

13

14

15Dip switch settingsA LED Pixelboard video display matrix may consist of up to 16 controllers or 16 individual grid sections in various pattern confi

16JP2 DipswitchesIn order for video to display properly across multiple sections or drivers, each driver must be addressed accordingly. The JP2 dipsw

17You can use the table below to quickly identify the dipswitch settings for your matrix width.

Congratulations!You have bought a great, innovative product from Showtec.The Showtec LED Pixelboard brings excitement to any venue.You can rely on Sho

18Transmitter CardInstall the transmitter card in an available PCI slot in your computer. The transmitter card is the interface between your PC, LED S

19RS232 cable connection (AUX Connection)RS232 to RJ-11connection:2-------------------------------------------------------33--------------------------

20Transmitter card installation1) Turn off your computer and disconnect from the powersource. Always take these precautions before opening the cas

21Example System Configurations

22

23

24Special Applications

25

26MaintenanceThe operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four

27Product SpecificationModel: Showtec LED PixelboardGray Scale: Red/Green/Blue 256 grade(8 BIT)Colors: 256 x 256 x 256 = 16M ColorsSupports Display: 6

1223555666789101112151516181819202124262626262728ShowtecShowtec LED Pixelboard™ Product Guide Warning..…...

28Other Showtec LED Products:LED Deco-Tile Basic (41111) and LED Deco-Tile Pro (41112)LED Pixel Wash (42201)LED Pixel Track (42200)Quadra 20 (30984)

29Octopod 30 (30985)Trackpod 30 (30986)Octopod 90 (30987)Trackpod 90 (30988)

30Riva 90 (30989)LED Panel (41070)LED Wallpainter (41200)Aquapainter (41220)

2007 Showtec.

2WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the ins

3 If the external cable is damaged, it has to be replaced by a qualified technician. If device is dropped or struck, disconnect mains power supply i

4Connection with the mainsConnect the device to the mains with the power-plug.Always pay attention, that the right color cable is connected to the rig

5Description of the deviceFeaturesThe LED Pixelboard is a fabulous LED Lighteffect from Showtec.• Inputs: DVI, VGA, RF, YC, YCbCr, SCART, and HDMI• 16

6Overall Requirements• Windows XP computer with an available PCI slot• ATI graphics card or Nvdia Geforce with DVI Out• LED Pixelboard Controller (101

7LED Pixelboard LimitationsHorizontal Panels (Left/Right)Vertical Panels (UP/Down)Resolution1 Panel is 16 pixels on your PC screen. So 8 x 6 panels (4