SHOWTEC 41200 User's Guide download pdf (Page 17)

Dip switch settings

A LED Pixelboard video display matrix may consist of up to 16 controllers or 16 individual grid sections in

various pattern configurations. Each controller must be addressed according to your configuration so that

the video appears whole and intact. Two internal dipswitches (JP1 & JP2) are addressed according to your

system layout and configuration.

Open the controller to change the Dipswitch settings.

1 Panel is 16 pixels on your PC screen.

So 8 x 6 panels ( 4 x 3 meters) = a resolution of 128 x 96 pixels in Windows XP.

JP1:

Sets the total width one driver will display. The width can be described in either number of panels or pixel

resolution. Possible widths include 1 to 6 panels or 16 to 96 horizontal pixels

JP2:

Sets the starting vertical line from which this driver will begin to display video. Remember that a matrix may

consist of multiple sections across, so in order to display video correctly you will need to set starting address

for each section handled by a driver.

JP1 Dipswitches

JP1 dipswitches have their own unique addressing method. For example setting dipswitch 3 to ON adds 32

values to the counter while setting 11 to ON subtracts 16.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

No comments

SHOWTEC 41200 User's Guide Page 17