SHOWTEC Scanmaster 1 User's Guide download pdf (Page 10)

Display Information

The LCD Display contains a maximum of 2 lines, each containing 8 characters. Below are the definitions.

LCD Display Message

SN1 Scene 1

BK1 Bank 1

CHASE1 Chase 1 is activated

STEP 009 The ninth step of a chase

DATA 184 DMX Value (000-255)

SP: 1M54s The current speed is 1 minute 54 seconds

TP: 4.25s The time of the last two taps is 4.25 seconds

ASS 04 05 Assign DMX channels 4 and 5

RES 10 13 Reverse DMX channels 10 and 13

Unit Setup

The unit is preset to allocate 16 channels per fixture. In order to assign your fixtures to the scanner buttons,

located on the left side of the unit, you will need to space your fixtures 16 DMX channels apart.

Use the Following chart for DMX Addressing

Fixture # Digital # Dip Switch Setting

1 "On"

217

1 and 5 "On"

333

1 and 6 "On"

449

1, 5 and 6 "On"

565

1 and 7 "On"

681

1, 5 and 7 "On"

797

1, 6 and 7 "On"

8 113

1, 5, 6 and 7 "On"

9 129

1 and 8 "On"

10 145

1, 5 and 8 "On"

11 161

1, 6 and 8 "On"

12 177

1, 5, 6 and 8 "On"

Enabling the program mode

To enable program mode, hold the PROGRAM button for seconds until LED is lit.

Set-up Joystick

1) Press and hold the PROGRAM button, until the LED is lit.

2) Press and hold the MODE and FINE button at the same time, the assign LED should light. If the reverse

LED lights, press FINE and MODE again to enter assign mode.

3) Use the BANK up and down keys to select the axis you wish to assign (Pan or TILT).

4) Use the "TAP/DISPLAY button to select a 16 or 8 channel mode.

5) Press the button corresponding to the scanner you wish to assign.

6) While holding the MODE button, press the scene number corresponding to the slider which controls the

movement. (Example: If pan is controlled by slider number 4, press and hold the MODE button while

tapping scene button 4#).

7) When finished press the FINE and MODE buttons at the same time again to exit Assign mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

SHOWTEC Scanmaster 1 User's Guide Page 10

Comments to this Manuals

Related products and manuals for DJ controllers SHOWTEC Scanmaster 1