SHOWTEC ORDERCODE 30645 User's Guide download pdf (Page 10)

Focusing the beam

1. Loosen the beam focus knob located under the barrel (Fig. 7).

2. Slide the lens tube forward or backward to achieve the desired beam edge.

3. Once the fixture is focused.tighten the beam focus knob.

Fig. 7

Color frame retaining clip

The color frame holder is equipped with a spring-loaded retaining clip thap prevents color

frames and accessories from falling out (Fig. 8).

WARNING! Make sure all color frame accessories are locked in position with the retaining clip

before hanging the Source Four.

1. Release the retaining clip by pushing it sideways while gently pulling backwards.

2. Insert the color frame.

3. Lock the retaining clip by pushing sideways while gently pushing forward.

Fig. 8

Color Notes

The performance of saturated colors is not guaranteed

with low temperature ranges. For best results, always

use a high quality and temperature color medium.

This product color extender may help increase your

gel life.

Contact your dealer for ordering information.

Fig. 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

SHOWTEC ORDERCODE 30645 User's Guide Page 10