SHOWTEC ORDERCODE 30645 User's Guide download pdf (Page 12)

Rotating the barrel assembly

1. Loosen the barrel rotation knob directly behind the shutters on the underside of the reflector housing

(Fig. 12). Do not remove the barrel rotation knob.

2. Rotate the barrel to the desired position (up to 25º in either direction from the centered position).

3. Once the barrel is positioned, tighten the barrel’s rotation knob to lock it into position.

Fig. 12

Installation with clamp

You can choose an appropriate clamp from your dealer to fix the fixture to the mounting pipe and allows you

to adjust the position of the fixture once it is mounted. (Fig. 13).

1. Tightly fasten the clamp to the yoke with the provide yock bolt and lock washer.

2. Place the clamp on the mounting pipe, then tighten the pipe bolt to secure it.

3. Loosen the clamp pan screw and rotate the yoke to the desired position.

4. Tighten the pan screw to lock the fixture into position.

Fig. 13

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

SHOWTEC ORDERCODE 30645 User's Guide Page 12