SHOWTEC Studiobeam MSR-575 User's Guide download pdf (Page 6)

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the device

will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 2 meters.

The maximum ambient temperature t

= 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.

You endanger your own safety and the safety of others!

Installing the Studiobeam with a Clamp

You can choose an appropriate mounting clamp (ordercode 70109S / 70109B) from Showtec to securely

mount your Studiobeam to the trussing system. Once it has been mounted, adjust the mounting position of

the Studiobeam.

1. Tightly fasten the hook to the yoke with the provided yoke bolt and lock washer.

2. Place the clamp on the truss system, then tighten the pipe bolt to secure it.

3. Adjust the desired inclination-angle via the yoke and fix the yoke locking knob.

4. Pull the safety-cable through the hole on the housing and over the truss system.

Insert the end in the carabine and tighten the safety screw.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

SHOWTEC Studiobeam MSR-575 User's Guide Page 6