SHOWTEC DimMaster User's Guide download pdf (Page 13)

2 SET CHANNELS?

2311 CURVE [LIN]

2 SET CHANNELS?

STORED OK

2 SET CHANNELS?

231 CHANNEL [ A]

2 SET CHANNELS?

23 SET CURVES?

2 SET CHANNELS?

2411 [0.0s]

2 SET CHANNELS?

241 CHANNEL [ A]

2 SET CHANNELS?

24 SET FADE?

2 SET CHANNELS?

STORED OK

SET CURVES

1. Tap UP/DOWN to scroll to the sub-menu "23 SET CURVES?", the LCD shows

2. Press YES, the LCD shows

You may select all or channel 1-6 using the UP/DOWN buttons,

default=A(all channels).

3. Press YES again, the LCD shows

You may select desired curve mode using the UP/DOWN buttons,

default=Linear.

Use linear for normal dimming, square for greater subtlety at the lower end

and switch for ON/OFF applications.

4. Press YES to store your setting, the LCD shows

SET FADE

1. Tap the UP/DOWN buttons to scroll to the sub-menu "24 SET FADE?",

the LCD shows

2. Press YES, the LCD shows

You may select all or channel 1-6 using the UP/DOWN buttons,

default=A(all channels).

3. Press YES again, the LCD shows

You may adjust fade time within 0.0s~999s using UP/DOWN, default=0.0s.

4. Press YES to store your setting, the LCD shows

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

No comments

SHOWTEC DimMaster User's Guide Page 13