SHOWTEC DimMaster User's Guide download pdf (Page 17)

4 TEST CHANNELS?

41 CH [A]

5 SET INPUTS?

51 [DMX ONLY]

5 SET INPUTS?

STORED OK

6 UNIT SETUP?

61 [SLAVE]

6 UNIT SETUP?

STORED OK

7 SET TEXT?

WELCOME [W]

ET TEXT?

4. TEST CHANNELS ?

1. Tap the UP/DOWN buttons to scroll to "4 TEST CHANLS?"

2. Press YES, the LCD shows

You may select all or channel 1-6 using the UP/DOWN buttons,

default=A(all channels).

3. Press YES once, the appropriate channel(s) will be fully on;

Press YES twice, the appropriate channel(s) will be half on;

Press YES three times, the appropriate channel(s) will go out.

5. SET INPUTS ?

1. Tap the UP/DOWN buttons to scroll to "5 SET INPUTS?"

2. Press YES, the LCD shows

You may select DMX ONLY/ MAP ONLY using the UP/DOWN buttons,

default=DMX ONLY.

3. Press YES to store your setting, the LCD shows

6. UNIT SETUP ?

1. Tap the UP/DOWN buttons to scroll to "6 UNIT SETUP?"

2. Press YES, the LCD shows

You may select MASTER/ SLAVE using the UP/DOWN buttons,

default=SLAVE.

3. Press YES to store your setting, the LCD shows

7. SET TEXT ?

1. Tap the UP/DOWN buttons to scroll to "7 SET TEXT?"

2. Press YES, the LCD shows

You may change the blinking character using the UP/DOWN buttons followed

by YES. When you've finished the new text, tap the UP/DOWN buttons

until [END] appears, press YES to store the new text. If you press YES without [END], the new text won't

be stored into memory. If you want to clear all these characters, tap UP/DOWN until [CLR] appears,

press YES, the text will be cleared.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

No comments

SHOWTEC DimMaster User's Guide Page 17