SHOWTEC Indigo 150 LED User's Guide download pdf (Page 25)

Glass Gobo Orientation

Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring).

Textured gobos are inserted with the smooth side against the spring. This provides the best results when

combining rotating gobos.

When an object is held up to the coated side When an object is held up to the uncoated

there is no space between the object and its side there is a space between the object and

reflection. The back edge of the gobo cannot its reflection. The back edge of the gobo can

be seen when looking through the coated be seen when looking through the uncoated

side. side.

Rotating Gobo-wheel Color-wheel

5 6 7

4 8

3 2 1

Fig. 9 Fig. 10

Troubleshooting

No Light, No Movement - All Products

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

If the light effect does not operate properly, refer servicing to a technician.

Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.

1. Power supply. Check that the unit is plugged into an appropriate power supply.

2. The LEDs. Return the Indigo 150 LED to your Showtec dealer.

3. The fuse. Replace the fuse. See page 23 for replacing the fuse.

1 2 ... 20 21 22 23 24 25 26 27 28

No comments

SHOWTEC Indigo 150 LED User's Guide Page 25