SHOWTEC LED Music Tube Controller User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Showtec
In order to run your LED Aqua-Painters you need one set of PSU & Distributor for each 6
pieces Aqua-Painter. The PSU contains the powersupply and gives the necessary power to all
the Aqua-Painters. Moreover the PSU contains the DMX input and output to control your LED
Aqua-Painters. The PSU has an protection-degree of IP-44 and can be mounted indoor as
well outdoor. To the distributor 6 pieces of LED Aqua-Painters can be connected. This distribu-
tor has an protection degree of IP-68 and can be mounted up to 2 meters under water. The
distributor dramatically reduces cable runs and provides power and data-distribution for your
LED Aqua-Painters.
Distributor for 6 pieces
LED Aquapainter
Zur Montage von 6 LED-Aqua-Paintern ist je-
weils ein Set mit PSU und Verteiler erforderlich. Der
PSU (Power-Supply-Unit) wird am DMX-Controller
angeschlossen und ist spritzwasserfest (IP-44). Der
Verteiler ist wasserdicht bis 2 m Tiefe (IP-68) und
wird mit den PSU und mit max. 6 Aqua-Paintern ver-
bunden. Durch den wasserdichten Verteiler werden
sonst unnötig lange Kabelverbindungen überfl üssig.
ORDERCODE:
41221
Showtec
External PSU for LED Aquapainter
ORDERCODE
41222
Showtec
Waterproof professional DMX colorchanger
The LED Aquapainter is a high power water submersible LED lighting xture, which is an
ideal xture for both indoor and outdoor applications requiring full colour-mixing capabilities,
such as fountains, pool, theme park, exhibition, commercial and architectural illuminations. For
best heat dissipation, the LED Aquapainter is recommended to be used underwater. The LED
Aquapainter has a protection rating of IP68, which is suitable for submersion up to 2 meter un-
derwater. The beam-angle is 25 degrees. The unit is controllable by DMX (3 channels). In order
to run the LED Aquapainter, a separate distributor (41221) and PSU (41222) is needed.
LED Aquapainter
Der LED Aquapainter ist ein RGB Power-LED Fluter, der auch für die Unterwasser-Montage (z.B. Spring-
brunnen) geeignet ist. Der Aqua-LED kann bis zu 2 Meter Unterwasser montiert werden und hat einen
Schutzgrad von IP-68. Der Lichtbündelwinkel beträgt 25° und der Controller wird über 3 DMX-Kanäle ge-
steuert. Für eine fachgerechte Montage sind ein LED Distributor (Bestell-Nr. 41221) für max. 6 Aquapainter
und ein LED PSU (Bestell- Nr. 41222) erforderlich.
Technical Information
DMX-Controlled
Power Supply: 12V (via external PSU: 41222)
Power Consumption: 25W
Total LEDs: 360
(120 red, 120 green,
120 blue)
Beam angle: 25°
Submersion depth: 400mm-2000mm
Protection rating: IP68
Shell material: Alluminium alloy
Dimensions: 255x180x245,4 mm
(LxWxH), (including bracket)
Weight: 9,14Kg
ORDERCODE:
41220
LED Colorpaint Spots
LED Colorpaint Spots
Deco & Designlight
267
Showtec
L
i
g
h
t
&
S
h
o
w
68
IP
44
IP
DMX
CONTROLLABLE
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Comments to this Manuals

No comments