SHOWTEC Phantom 250 Spot User's Guide

Phantom 50 LED Spot ORDERCODE 40187 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +

8 Backside Fig. 2 3 4 5 6 3) IEC power connector

9 Control Modes There are 4 modes: • Stand-alone (built-in programs) • Sound-controlled • Master/Slave • DMX512 (13 Channels ADVANCED or 8 chann

10 Multiple Phantoms (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. 2. Always u

11 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show

12 Control Panel Fig. 5 A. LCD Display D. Down Button B. MODE/ESC button E. ENTER Button C. Up Butt

13 Menu Overview

14 Main Menu Options DMX address Built-in Programs Slow/Fast/Sound-control/Remote control/Slave Pan/Reverse Pan Tilt/Reverse Tilt Dis

15 Built-in Programs Mode You can select 5 different Programs when using the Giant LED. Press MODE until the display shows ,then

16 Tilt Mode When the display shows : , the Tilt is 270º. When you press Up/Down and the display shows , the Pan i

17 DMX Protocol 13 Channels ( ) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN).

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Phantom 50 LED Spot brings excitement to any venue. Whether

18 48-55 Gobo 6 (Metal) 56-63 Gobo 7 (Metal) 64-71 Gobo Shake 7 from slow to fast 74-79 Gobo Shake 6 from slow to fast 80-87 Gobo Shake 5 from slow t

19 DMX Protocol 8 Channels ( ) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN).

20 128-191 Clockwise rotation (CW) rainbow effect from slow to fast 192-255 Counter-clockwise rotation (CCW) rainbow effect from slow to fast Channe

21 Replacing a Fuse Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse burns out, the pro

22 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · C

23 Product Specification Model: Showtec Phantom 50 LED Spot Input Voltage: 100-240 VAC Peak Power 227 Watt; Continuous Power 185 Watt Fuse: F2A / 250

1 2 2 4 4 6 6 7 7 8 8 8 9 9 9 9 10 11 11 12 12 12 13 14 14 15 15 15 15 15 15 16 16 16 16 16 17 17 19 20 20 21 21 21 21 21 23 Showtec Showtec

2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all

3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod

4 OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will

5 Mounting a clamp to the underside of the Phantom moving head Improper installation can cause serious damage to peop

6 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly

7 Description of the device Features The Showtec Phantom 50 LED Spot is a moving-head with high output and great effects. • DMX-control via standard